各种ASP无组件上载，带进度条的实在太多，用起来也不方便，今天自己写了一个，希望大家给点意见
页面都是UTF－8 编码的，用的时候可根据自己页面编码转换
核心编码：SundyUpload.asp
例子：Example.asp
SundyUpload.asp代码如下：
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<%
Dim SundyUpload_SourceData
Class SundyUpload
Dim objForm,objFile,Version,objProgress
Dim xmlPath,CharsetEncoding
Public Function Form(strForm)
strForm=lcase(strForm)
If NOT objForm.exists(strForm) Then
Form=""
Else
Form=objForm(strForm)
End If
End Function
Public Function File(strFile)
strFile=lcase(strFile)
If NOT objFile.exists(strFile) Then
Set File=new FileInfo
Else
Set File=objFile(strFile)
End If
End Function
Public Sub UploadInit(progressXmlPath,charset)
Dim RequestData,sStart,Crlf,sInfo,iInfoStart,iInfoEnd,tStream,iStart,theFile
Dim iFileSize,sFilePath,sFileType,sFormValue,sFileName
Dim iFindStart,iFindEnd
Dim iFormStart,iFormEnd,sFormName
Version="Upload Width Progress Bar Version 1.0"
Set objForm=Server.CreateObject("Scripting.Dictionary")
Set objFile=Server.CreateObject("Scripting.Dictionary")
If Request.TotalBytes<1 Then Exit Sub
Set tStream = Server.CreateObject("adodb.stream")
Set SundyUpload_SourceData = Server.CreateObject("adodb.stream")
SundyUpload_SourceData.Type = 1
SundyUpload_SourceData.Mode =3
SundyUpload_SourceData.Open
Dim TotalBytes
Dim ChunkReadSize
Dim DataPart, PartSize
Dim objProgress
TotalBytes = Request.TotalBytes '' 总大小
ChunkReadSize = 64 * 1024 '' 分块大小64K
BytesRead = 0
xmlPath = progressXmlPath
CharsetEncoding = charset
If CharsetEncoding = "" Then
CharsetEncoding = "utf-8"
End If
Set objProgress = New Progress
objProgress.ProgressInit(xmlPath)
objProgress.UpdateProgress Totalbytes,0
''循环分块读取
Do While BytesRead < TotalBytes
''分块读取
PartSize = ChunkReadSize
If PartSize BytesRead > TotalBytes Then PartSize = TotalBytes - BytesRead
DataPart = Request.BinaryRead(PartSize)
BytesRead = BytesRead PartSize
SundyUpload_SourceData.Write DataPart
objProgress.UpdateProgress Totalbytes,BytesRead
Loop
''SundyUpload_SourceData.Write Request.BinaryRead(Request.TotalBytes)
SundyUpload_SourceData.Position=0
RequestData =SundyUpload_SourceData.Read
iFormStart = 1
iFormEnd = LenB(RequestData)
Crlf = chrB(13) & chrB(10)
sStart = MidB(RequestData,1, InStrB(iFormStart,RequestData,Crlf)-1)
iStart = LenB (sStart)
iFormStart=iFormStart iStart 1
While (iFormStart 10) < iFormEnd
iInfoEnd = InStrB(iFormStart,RequestData,Crlf & Crlf) 3
tStream.Type = 1
tStream.Mode =3
tStream.Open
SundyUpload_SourceData.Position = iFormStart
SundyUpload_SourceData.CopyTo tStream,iInfoEnd-iFormStart
tStream.Position = 0
tStream.Type = 2
tStream.Charset =CharsetEncoding
sInfo = tStream.ReadText
tStream.Close
''取得表单项目名称
iFormStart = InStrB(iInfoEnd,RequestData,sStart)
iFindStart = InStr(22,sInfo,"name=""",1) 6
iFindEnd = InStr(iFindStart,sInfo,"""",1)
sFormName = lcase(Mid (sinfo,iFindStart,iFindEnd-iFindStart))
''如果是文件
If InStr (45,sInfo,"filename=""",1) > 0 Then
Set theFile=new FileInfo
''取得文件名
iFindStart = InStr(iFindEnd,sInfo,"filename=""",1) 10
iFindEnd = InStr(iFindStart,sInfo,"""",1)
sFileName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
theFile.FileName=getFileName(sFileName)
theFile.FilePath=getFilePath(sFileName)
''取得文件类型
iFindStart = InStr(iFindEnd,sInfo,"Content-Type: ",1) 14
iFindEnd = InStr(iFindStart,sInfo,vbCr)
theFile.FileType =Mid (sinfo,iFindStart,iFindEnd-iFindStart)
theFile.FileStart =iInfoEnd
theFile.FileSize = iFormStart -iInfoEnd -3
theFile.FormName=sFormName
If NOT objFile.Exists(sFormName) Then
objFile.add sFormName,theFile
End If
Else
''如果是表单项目
tStream.Type =1
tStream.Mode =3
tStream.Open
SundyUpload_SourceData.Position = iInfoEnd
SundyUpload_SourceData.CopyTo tStream,iFormStart-iInfoEnd-3
tStream.Position = 0
tStream.Type = 2
tStream.Charset = CharsetEncoding
sFormValue = tStream.ReadText
tStream.Close
If objForm.Exists(sFormName) Then
objForm(sFormName)=objForm(sFormName)&", "&sFormValue
Else
objForm.Add sFormName,sFormValue
End If
End If
iFormStart=iFormStart iStart 1
Wend
RequestData=""
Set tStream = Nothing
End Sub
Private Sub Class_Initialize
End Sub
Private Sub Class_Terminate
If Request.TotalBytes>0 Then
objForm.RemoveAll
objFile.RemoveAll
Set objForm=Nothing
Set objFile=Nothing
SundyUpload_SourceData.Close
Set SundyUpload_SourceData = Nothing
End If
Set objProgress = Nothing
Set objFso = Server.CreateObject("Scripting.FileSystemObject")
If objFso.FileExists(xmlPath) Then
objFso.DeleteFile(xmlPath)
End If
Set objFso = Nothing
End Sub
Private Function GetFilePath(FullPath)
If FullPath <> "" Then
GetFilePath = left(FullPath,InStrRev(FullPath, ""))
Else
GetFilePath = ""
End If
End Function
Private Function GetFileName(FullPath)
If FullPath <> "" Then
GetFileName = mid(FullPath,InStrRev(FullPath, "") 1)
Else
GetFileName = ""
End If
End Function
End Class
Class FileInfo
Dim FormName,FileName,FilePath,FileSize,FileType,FileStart
Private Sub Class_Initialize
FileName = ""
FilePath = ""
FileSize = 0
FileStart= 0
FormName = ""
FileType = ""
End Sub
Public Function SaveAs(FullPath)
Dim dr,ErrorChar,i
SaveAs=True
If trim(fullpath)="" or FileStart=0 or FileName="" or right(fullpath,1)="/" Then Exit Function
Set dr=CreateObject("Adodb.Stream")
dr.Mode=3
dr.Type=1
dr.Open
SundyUpload_SourceData.position=FileStart
SundyUpload_SourceData.copyto dr,FileSize
dr.SaveToFile FullPath,2
dr.Close
Set dr=Nothing
SaveAs=False
End Function
End Class
Class Progress
Dim objDom,xmlPath
Dim startTime
Private Sub Class_Initialize
End Sub
Public Sub ProgressInit(xmlPathTmp)
Dim objRoot,objChild
Dim objPI
xmlPath = xmlPathTmp
Set objDom = Server.CreateObject("Microsoft.XMLDOM")
Set objRoot = objDom.createElement("progress")
objDom.appendChild objRoot
Set objChild = objDom.createElement("totalbytes")
objChild.Text = "0"
objRoot.appendChild objChild
Set objChild = objDom.createElement("uploadbytes")
objChild.Text = "0"
objRoot.appendChild objChild
Set objChild = objDom.createElement("uploadpercent")
objChild.Text = "0%"
objRoot.appendChild objChild
Set objChild = objDom.createElement("uploadspeed")
objChild.Text = "0"
objRoot.appendChild objChild
Set objChild = objDom.createElement("totaltime")
objChild.Text = "00:00:00"
objRoot.appendChild objChild
Set objChild = objDom.createElement("lefttime")
objChild.Text = "00:00:00"
objRoot.appendChild objChild
Set objPI = objDom.createProcessingInstruction("xml","version=''1.0'' encoding=''utf-8''")
objDom.insertBefore objPI, objDom.childNodes(0)
objDom.Save xmlPath
Set objPI = Nothing
Set objChild = Nothing
Set objRoot = Nothing
Set objDom = Nothing
End Sub
Sub UpdateProgress(tBytes,rBytes)
Dim eTime,currentTime,speed,totalTime,leftTime,percent
If rBytes = 0 Then
startTime = Timer
Set objDom = Server.CreateObject("Microsoft.XMLDOM")
objDom.load(xmlPath)
objDom.selectsinglenode("//totalbytes").text=tBytes
objDom.save(xmlPath)
Else
speed = 0.0001
currentTime = Timer
eTime = currentTime - startTime
If eTime>0 Then speed = rBytes / eTime
totalTime = tBytes / speed
leftTime = (tBytes - rBytes) / speed
percent = Round(rBytes *100 / tBytes)
''objDom.selectsinglenode("//uploadbytes").text = rBytes
''objDom.selectsinglenode("//uploadspeed").text = speed
''objDom.selectsinglenode("//totaltime").text = totalTime
''objDom.selectsinglenode("//lefttime").text = leftTime
objDom.selectsinglenode("//uploadbytes").text = FormatFileSize(rBytes) & " / " & FormatFileSize(tBytes)
objDom.selectsinglenode("//uploadpercent").text = percent
objDom.selectsinglenode("//uploadspeed").text = FormatFileSize(speed) & "/sec"
objDom.selectsinglenode("//totaltime").text = SecToTime(totalTime)
objDom.selectsinglenode("//lefttime").text = SecToTime(leftTime)
objDom.save(xmlPath)
End If
End Sub
private Function SecToTime(sec)
Dim h:h = "0"
Dim m:m = "0"
Dim s:s = "0"
h = round(sec / 3600)
m = round( (sec mod 3600) / 60)
s = round(sec mod 60)
If LEN(h)=1 Then h = "0" & h
If LEN(m)=1 Then m = "0" & m
If LEN(s)=1 Then s = "0" & s
SecToTime = (h & ":" & m & ":" & s)
End Function
private Function FormatFileSize(fsize)
Dim radio,k,m,g,unitTMP
k = 1024
m = 1024*1024
g = 1024*1024*1024
radio = 1
If Fix(fsize / g) > 0.0 Then
unitTMP = "GB"
radio = g
ElseIf Fix(fsize / m) > 0 Then
unitTMP = "MB"
radio = m
ElseIf Fix(fsize / k) > 0 Then
unitTMP = "KB"
radio = k
Else
unitTMP = "B"
radio = 1
End If
If radio = 1 Then
FormatFileSize = fsize & " " & unitTMP
Else
FormatFileSize = FormatNumber(fsize/radio,3) & unitTMP
End If
End Function
Private Sub Class_Terminate
Set objDom = Nothing
End Sub
End Class
%>
<script language="javascript">
//启动进度条
function startProgress(xmlPath){
displayProgress();
setProgressDivPos();
setTimeout("DisplayProgressBar(''" xmlPath "'')",500);
}function DisplayProgressBar(xmlPath){
var xmlDoc = new ActiveXObject("Msxml2.DOMDocument.3.0");
xmlDoc.async = false;
xmlDoc.load(xmlPath);
if (xmlDoc.parseError.errorCode!=0){
var error = xmlDoc.parseError;
alert(error.reason)
setTimeout("DisplayProgressBar(''" xmlPath "'')",1000);
return;
}
var root = xmlDoc.documentElement; //根节点
var totalbytes = root.childNodes(0).text;
var uploadbytes = root.childNodes(1).text;
var percent = root.childNodes(2).text;
ProgressPercent.innerHTML = percent "%";
ProgressBar.style.width = percent "%";
uploadSize.innerHTML = uploadbytes;
uploadSpeed.innerHTML = root.childNodes(3).text;
totalTime.innerHTML = root.childNodes(4).text;
leftTime.innerHTML = root.childNodes(5).text;
if (percent<100){
setTimeout("DisplayProgressBar(''" xmlPath "'')",1000);
}
}
function displayProgress(){
var objProgress = document.getElementById("Progress");
objProgress.style.display = "";
}
function closeProgress(){
var objProgress = document.getElementById("Progress");
objProgress.style.display = "none";
}
function setProgressDivPos(){
var objProgress = document.getElementById("Progress");
objProgress.style.top = document.body.scrollTop (document.body.clientHeight-document.getElementById("Progress").offsetHeight)/2
objProgress.style.left = document.body.scrollLeft (document.body.clientWidth-document.getElementById("Progress").offsetWidth)/2;
}
</script>
<style type="text/css">
.progress {
position: absolute;
padding: 4px;
top: 50;
left: 400;
font-family: Verdana, Helvetica, Arial, sans-serif;
font-size: 12px;
width: 250px;
height:100px;
background: #FFFBD1;
color: #3D2C05;
border: 1px solid #715208;
/* Mozilla proprietary */
-moz-border-radius: 5px;
/*-moz-opacity: 0.95; */
}
.progress table,.progress td{
font-size:9pt;
}
.Bar{
width:100%;
height:15px;
background-color:#CCCCCC;
border: 1px inset #666666;
margin-bottom:4px;
}
.ProgressPercent{
font-size: 9pt;
color: #000000;
height: 15px;
position: absolute;
z-index: 20;
width: 100%;
text-align: center;
}
.ProgressBar{
background-color:#91D65C;
width:1px;
height:15px;
}
</style>
<div id="Progress" style="display:none;" class="progress">
<div class="bar">
<div id="ProgressPercent" class="ProgressPercent">0%</div>
<div id="ProgressBar" class="ProgressBar"></div>
</div>
<table border="0" cellspacing="0" cellpadding="2">
<tr>
<td>已经上传</td>
<td>:</td>
<td id="uploadSize"></td>
</tr>
<tr>
<td>上传速度</td>
<td>:</td>
<td id="uploadSpeed"> </td>
</tr>
<tr>
<td>共需时间</td>
<td>:</td>
<td id="totalTime"> </td>
</tr>
<tr>
<td>剩余时间</td>
<td>:</td>
<td id="leftTime"> </td>
</tr>
</table>
</div>
Example.asp代码如下：
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!--#include file="SundyUpload.asp"-->
<%
''此例子文档编码都是UTF-8,如果是其他编码的系统，请将编码转换为相应的编码，不然表单获取数据可能会乱码
Dim objUpload,opt
Dim xmlPath
Dim fileFormName,objFile,counter
opt = request.QueryString("opt")
If opt = "Upload" Then
xmlPath = Server.MapPath(request.QueryString("xmlPath"))''将虚拟路径转换为实际路径
Set objUpload=new SundyUpload ''建立上传对象
objUpload.UploadInit xmlPath,"utf-8"
counter = 1
Response.Write("普通表单：" & objUpload.Form("normalForm") & "<BR><BR>")''获取表单数据
For Each fileFormName In objUpload.objFile
Set objFile=objUpload.objFile(fileFormName)
fileSize = objFile.FileSize
fileName = objFile.FileName
If fileSize > 0 Then
Response.Write("File Size:" & fileSize & "<BR>")
Response.Write("File Name:" & objFile.FilePath & fileName & "<BR>")
Response.Write("File Description:" & objUpload.Form("fileDesc" & counter) & "<BR><BR>")
''objFile.SaveAs 文件的实际路径（可以自行处理）
End If
counter = counter 1
Next
End If
''为上载进度条数据文件（XML文件指定虚拟路径）
''最好是随机的，因为可能多个人同时上载，需要不同的进度数据
''这个路径需要在提交的时候传入上载组件中，以便在上载过程中更改进度数据
''客户端使用Javascript来读取此XML文件，显示进度
xmlPath = "upload/" & Timer & ".xml"
%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Sundy Upload Progress Bar Example</title>
<script language="javascript">
function chkFrm(){
var objFrm = document.frmUpload;
if (objFrm.file1.value=="" && objFrm.file2.value==""){
alert("请选择一个文件");
objFrm.file1.focus();
return false;
}
objFrm.action = "Example.asp?opt=Upload&xmlPath=<%=xmlPath%>";
startProgress(''<%=xmlPath%>'');//启动进度条
return true;
}
</script>
</head>
<body>
<form name="frmUpload" method="post" action="Example.asp" enctype="multipart/form-data" onSubmit="return chkFrm()">
普通表单：<BR><input type="text" name="normalForm" size="40"><BR><BR>
文件1：<BR>
<input type="file" name="file1" size="40"></br>
<input type="text" name="fileDesc1" size="30"><BR><BR>
文件2：<BR>
<input type="file" name="file2" size="40"></br>
<input type="text" name="fileDesc2" size="30"><BR>
<input type="submit" name="btnSubmit" value="submit"/>
</form>
</body>
</html>
